Robotic System for Elevators

• Warranty: 12 Months
• Type: Elevator Spare
• Suitable for: Elevator
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: /
• Load Capacity: None
• Persons: None
• Speed: <100ms
• Drive Mode: Other
• Control Type: Other
• Lift Mechanism: None
• Use of Occasions: Public Traffic
• Guide Rail: None
• Occasion: Airport, High Speed Rail Station, Train Station Wh
• Delivery: 3-4 Weeks
• Shipment: by Sea,by Air(DHL, FedEx, TNT,UPS and So on)
• Transport Package: Carton
• Specification: Other
• Trademark: Wabon
• Origin: China
• HS Code: 8431310090
• Production Capacity: 50000pieces/Year
• Package Size: 30.00cm * 60.00cm * 60.00cm
• Package Gross Weight: 5.000kg

Product Description

Robotic system for elevators

The robot wireless call elevator system is an intelligent floor registration system based on wireless Internet of Things. Through the elevator control system developed by Weibang Technology and installed inside and outside the elevator car and the wireless communication module installed inside the intelligent robot, the robot intelligent control system is integrated as a whole to realize the seamless connection between the robot and the building control system without manual intervention. To complete the intelligent elevator process for the robot to take the elevator to and from the target floor.

 

Functions

1. Elevator basic information collection:

The elevator control system sends the elevator operating status information to the robot throughout the entire process, including the current elevator floor, operating direction, and elevator door switch status.

 

2. The robot autonomously calls the elevator and takes the elevator:

all the elevator control commands issued by the robot realize the various control functions of the elevator through wireless communication, without manual intervention, and without physical contact with elevator control buttons.

 

3. Multiple connection options:

The communication between the ladder control system and the robot can provide 4G/WIFI/Rola or Bluetooth.

 

System Composition

The elevator control system includes an intelligent elevator control main board, a key control board (additional addition is needed when the 16th floor is exceeded), and a signal conversion board.

1. Intelligent elevator control main board:

Realizes wireless bridge connection with the communication module in the robot, sends elevator status information, and receives robot system instructions.

 

2. Signal acquisition board:

Collect the operating status of the robot dedicated elevator, including all the information required by the robot system such as the elevator running direction, the floor where it is, and the elevator door switch, and execute the elevator control instructions according to the robot system logic.

 

3. Key control board:

installed in the elevator car COP to control elevator floor buttons and door open/close buttons.

 

4. Wireless communication module:

Realize the wireless bridge connection with the elevator control wireless communication module, receive elevator operation information, and send robot system instructions. The module and the robot are connected via 232 serial.

 

5. Elevator call controller:

When receiving a robot instruction, it controls the outside call to light up and call the elevator to the corresponding floor.

 

Parameter

1. Technical parameters of intelligent ladder control motherboard

Technical parameters of intelligent ladder control motherboard
Operating Voltage	DC24V
Working current	<300mA
Working environment	Temperature -25ºC~65ºC Humidity ≤95% without condensation
Communication method	RS485 communication mode, CAN communication mode, RJ45 communication mode
Control layer	Control up to 192 floors

 

2. Keying board technical parameters

Keying board technical parameters
Operating Voltage	DC24V
Working current	<120mA
Working environment	Temperature -25ºC~65ºC Humidity ≤95% without condensation
Communication method	RS485 communication mode
Control layer	16 floors, can be connected to an expansion board, control up to 96 floors
Credit card operation time	<100ms
RF communication distance	<10m
output method	Relay contact passive output
Mean time between failures	>20000 hours
Mean time to repair	<0.5 hours

 

3. Signal acquisition box technical parameters

Model	EMS-01
Voltage	DC24V
Whole machine current	≤80mA
Signal interface	1. Parallel signal: signal voltage DC24V, common anode or common cathode, with photoelectric isolation; Coding method: binary, BCD code, Gray code, seven-segment code, etc. 2. Serial signals: Hitachi,  KONE, Mitsubishi, Xizi, STEP, Moneck, etc.
Working temperature	-20~60 degrees
Working environment humidity	10%~90% @ 40 degrees
Stored temperature	-20~70 degrees

 

4. Technical parameters of call controller

Technical parameters of call controller
Dimensions (L×W ×H)	73.6×86×18mm
Operating Voltage	Rated DC 24V, fluctuation 18V-30V
Working current	<10mA
Working environment	Temperature -25ºC~65ºC Humidity ≤95% without condensation
Communication method	RS485 communication mode