Customization: | Available |
---|---|
Warranty: | 12 Months |
Type: | Elevator Spare |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment methods: | |
---|---|
Support payment in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Emergency Lamp for elevator
Product Introduction
The emergency light is installed on the top of the elevator car or in the lift car, used for car top illumination or emergency illumination in the car during elevator maintenance, and is suitable for narrow places such as the car ceiling assembling. WABON emergency lamp is with professional optical design and constant current power supply design as well as installation friendly.
Product Parameter
Item |
Parameter |
Lamp model |
EML-LED-3W |
Lamp specifications |
50×50×47 (mm) |
Lamp input voltage |
DC 9V ~24V |
Input frequency range |
50/60Hz |
Output short circuit protection |
Can be short-circuited, self-healing |
Whole lamp power (W) |
3.0W±10% |
Rated correlated color temperature |
6000K-6500K is white |
Working current (mA) |
225mA~275mA (@DC 12V) |
Serial-parallel relationship |
3 series 2 parallel |
LED lamp bead package |
5730 patch |
Working temperature |
-30ºC~+60ºC |
Working environment humidity |
10%~90%, non-condensing |
Storage temperature |
-40ºC~+70ºC |
Installation method |
Surface mount |
IP rating |
X3 |
LED lamp life |
≥30000 hours (about 3 years) |
structure type |
Fixed lamps |
Temperature rise |
Surface temperature rise of aluminum radiator<=30K |
Lens material |
PE material |
Radiator material |
Aluminum |
Product feature and application
Product Feature:
WABON emergency lamp adopts a new type of high-brightness high-power chip LED, high color rendering, life of up to 30,000 hours (about 3 years);
The product is environmentally friendly, and turn on quickly, no flicker, no noise, without other radiation such as ultraviolet light, infrared light, and no harmful substances like mercury. The product meets the requirements of relevant regulations.
Applications: elevator car, elevator ceiling assembling
Product Qualification
Except for the specified items, all tests was carried out under the conditions of an ambient temperature of 25°C ± 1°C and a maximum relative humidity of 65% in an environment without convection wind.
Item |
Detection method |
Standard requirement |
Result |
Appearance |
Visual inspection |
Flawless appearance |
Pass |
Dimensions |
Vernier caliper |
Design drawings |
Pass |
Illumination (LUX) |
Ruler and illuminance meter |
Offset 0°: ≥15 |
Pass |
Temperature rise test |
See attached picture for test method |
Partial 30°: ≥20 |
Pass |
Work rate |
Test the surface temperature of the lamp after the lamp works stably (1 hour) under normal temperature and rated voltage |
Partial 60°: ≥30 |
Pass |
High temperature experiment (electric heating constant temperature drying box) |
Connect to the rated voltage, normally light up, and after the lamp is stable, measure its rated power with a power meter |
Partial 90°: ≥40 |
Pass |
Low temperature test (programmable constant temperature and humidity test chamber) |
Place the energized state in a constant temperature drying box, set the temperature of the constant temperature box at 60°C, and continue working for 24 hours. |
Surface temperature rise of aluminum radiator<=30K |
Pass |
High temperature storage test |
The sample is placed in a constant temperature and humidity box when the sample is energized, and the temperature in the box is reduced to -30°C within 1 H, and continues to work for 24 H. |
3.0W±10% |
Pass |
(Electric heating constant temperature drying oven) |
Put the sample into an electric thermostatic drying oven. After the temperature in the oven is lowered to 70ºC within 1 H, it is stored at 70ºC for 24 H. |
During and after the test, the sample can work normally without abnormality. |
Pass |
Low temperature storage test |
Put the sample into a constant temperature and humidity box, and after the temperature in the box is reduced to -40°C within 1H, store it at -40°C for 24H. |
During and after the test, the sample can work normally without abnormality. |
Pass |
(Programmable constant temperature and humidity test chamber) |
Put the sample in a constant temperature box, adjust the ambient temperature in the box to 60ºC, relative humidity 90% within 1 H, energize at the rated voltage, and output the rated load for 24 H |
After the test, place it at room temperature for 2 hours, the sample can work normally without damage |
Pass |
Constant temperature and humidity aging experiment (programmable constant temperature and humidity test box) |
Without packaging, without working |
After the test, place it at room temperature for 2 hours, the sample can work normally without damage |
Pass |
Physical damage test |
Drop height: 1 m |
During the test, the sample worked normally, and the lamps did not flicker or turn off. |
Pass |
Production Time
3 weeks production time
FAQ
LED emergency light does not light up under normal conditions
1) Kindly check whether there is normal power supply input.
2) Kindly check whether the wiring connection is correct.
3) Kindly check whether the power cable is connected well.